- 127 -
Advanced (Playback)
You can set protection for pictures you do not want to be deleted by mistake.
Touch [ ].
Touch [EXIT].
∫ Cancelling all the [PROTECT] settings
1 Touch [CANCEL] in step 3.
2 Touch [YES].
Note
•
The protect setting may not be effective on other equipment.
• Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
• Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they
cannot be deleted when the card’s Write-Protect switch is set to [LOCK].
[PROTECT]
Touch [PROTECT].
Touch the image from the thumbnail at the
bottom of the screen, and touch the main
image
.
• Repeat the step to set more than 2 images.
• Setting is cancelled by touching the same picture
again.
To Next Page
Loading...
