Advanced (Recording pictures)
- 74 -
This allows you to take pictures of a wide landscape.
Note
•
The flash setting is fixed to [Œ].
• The focus range is 5 m to ¶.
You can take pictures with connections suitable for creating panorama images.
∫ Setting the recording direction
1 Touch the direction to take picture.
•
The horizontal/vertical guideline will be displayed.
2 Take the picture.
•
You can retake the picture by selecting [RETAKE].
3 Touch [NEXT].
•
You can also press the shutter button halfway to set the menu.
• Part of the recorded image is displayed as transparent image.
4 Take picture after moving the camera horizontally
or vertically so the transparent image overlaps
•
When taking the third and later pictures, repeat steps 3
and
4.
• You can retake the picture by selecting [RETAKE].
5 Touch [EXIT].
Note
•
The flash setting is fixed to [Œ].
• The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
• The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal
processing. This is not a malfunction.
• We recommend using a tripod.
• The recorded images can be combined into panorama pictures using the software “ArcSoft
Panorama Maker” on the CD-ROM (supplied).
[SCENERY]
[PANORAMA ASSIST]
To Next Page
Loading...
