- 57 -
Advanced (Recording pictures)
∫ The available flash range to take pictures
•
The available flash range is an approximation.
• In [HIGH SENS.] (P78) in scene mode, the ISO sensitivity automatically switches to between
[ISO1600] and [ISO6400] and the available flash range also differs.
Wide: Approx. 1.15 m to approx. 15.4 m
Tele: Approx. 1.0 m to approx. 7.3 m
• In [FLASH BURST] (P80) in scene mode, the ISO sensitivity automatically switches to between
[ISO100] and [ISO3200] and the available flash range also differs.
Wide: Approx. 60 cm to approx. 4.0 m
Tele: Approx. 1.0 m to approx. 1.9 m
Adjust the flash output when the subject is small, or the reflectivity is very high or low.
1 Press 3(È) several times to display [FLASH].
2 Touch the slide bar.
•
You can adjust from [j2 EV] to [i2 EV] in steps of [1/3 EV].
• Select [0 EV] to return to the original flash output.
3 Touch
[EXIT].
• You can also close the menu by pressing the shutter button
halfway.
Note
•
When the flash output is adjusted, the flash output value appears on the upper left of the
screen.
• The flash output setting is memorised even if the camera is turned off.
• The flash output adjustment cannot be used while in [SCENERY]/[PANORAMA ASSIST]/
[NIGHT SCENERY]/[SUNSET]/[HI-SPEED BURST]/[FLASH BURST]/[STARRY SKY]/
[FIREWORKS]/[AERIAL PHOTO] in scene mode.
ISO sensitivity
Available flash range
Wide Tele
AUTO 60 cm to 6.0 m
1.0 m to 2.8 m
ISO80 60 cm to 1.7 m 1.0 m
ISO100 60 cm to 1.9 m 1.0 m
ISO200 60 cm to 2.7 m
1.0 m to 1.2 m
ISO400 60 cm to 3.8 m
1.0 m to 1.8 m
ISO800 80 cm to 5.4 m
1.0 m to 2.5 m
ISO1600 1.15 m to 7.7 m
1.0 m to 3.6 m
Adjust the flash output
To Next Page
Loading...
