Advanced (Recording pictures)
- 104 -
Touch year/month/day, set the return date
using [3]/[4], and then touch [SET].
• If you do not want to set the return date, touch [SET]
while the date bar is displayed.
Touch [LOCATION].
Touch [SET].
Enter the location.
• For details on how to enter characters, refer to “Entering Text” on P128.
Touch [CANCEL] to return to the menu screen.
• Touch [EXIT] to close the menu.
Take a picture.
• The number of days that have passed since the departure date is displayed for about
5 seconds if this unit is turned on etc. after setting the travel date or when the travel date
is set.
To Next Page
Loading...
