Advanced (Recording pictures)
- 128 -
Entering Text
It is possible to enter babies’ and pets’ names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
You can use the stylus pen (supplied) if it is hard to operate with your fingers.
Display the entry screen.
• You can display the entry screen via the following operations.
–[NAME] of [BABY1]/[BABY2] (P82) or [PET] (P83) in Scene Mode.
–[NAME] in [FACE RECOG.] (P99)
–[LOCATION] in [TRAVEL DATE] (P103)
–[TITLE EDIT] (P143)
Enter characters.
• Touch [ ] to switch text between [A] (capitals), [a]
(small case), [1] (numbers) and [&] (special
characters).
• The cursor at the entry position can be moved to the
left with touching [ ], and to the right with touching
[].
• To enter the same character again, touch [ ] to move the cursor.
• To enter a blank, touch []], or to delete an entered character, touch [DELETE].
• To stop editing at any time during text entry, touch [CANCEL].
• A maximum of 30 characters can be entered. (Maximum of 9 characters when setting
names in [FACE RECOG.])
Touch [SET] to finish.
• Display will return to the appropriate setting screen.
Note
•
Text can be scrolled if all of the entered text does not fit on the screen.
To Next Page
Loading...
