- 107 -
Advanced (Recording pictures)
Note
•
Return the setting to [HOME] when the vacation is finished by performing steps 1, 2 and 3.
• If [HOME] is already set, change only the travel destination, and use.
• If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
• The travel destination icon [“] appears when playing back pictures taken at the travel
destination.
Touch [DESTINATION].
C Depending on the setting, the time at the travel
destination area or the home area is displayed.
Select the destination area of your trip
using [2]/[1], and then touch [SET].
D Current time of the destination area
E Time difference
• If daylight saving time [ ] is used at the travel
destination, touch [ ]. (The time advances by one
hour.) Touch [ ] again to return to the original time.
Touch [EXIT] to close the menu.
To Next Page
Loading...
