Playback (advanced)
106
Playing Back Pictures with a TV Screen
ª Playing back pictures with A/V cable (supplied)
• Turn the camera and the TV off.
1 Connect the A/V cable to the
[A/V OUT] socket of the camera.
2 Connect the A/V cable to the video
input and the audio input sockets
of the TV.
• Yellow: to the video input socket
• White: to the audio input socket
3 Turn the TV on and select external
input.
4 Turn the camera on and then set
the mode dial to Playback mode
[].
ª Viewing pictures in other
countries
When setting [VIDEO OUT] on the
menu, you can view pictures on a TV in
other countries (regions) which use the
NTSC or PAL system.
• Even if you set menu selection for
[VIDEO OUT] to [PAL], the output
signal is still NTSC in the recording
mode.
ª Playback pictures on TV with SD
Memory Card slot
An SD Memory Card can be played on
TVs with an SD Memory Card slot.
If you playback pictures recorded using
[HDTV] mode on a High-Definition TV,
(HDTV has 16:9 aspect) the picture
quality will be higher.
¬
Suggestions/Tips
¬
• When connecting to a TV, we
recommend using the AC adaptor as
the power source.
• Use the supplied A/V cable only.
• Read the TV operating instructions
too.
1
2
A/V
OUT
USB
FZ10-PP.book 106 ページ ２００３年１１月１８日 火曜日 午後１時７分
To Next Page
Loading...
