Preparation
12
Charging the Battery
Charge the battery before using.
1 Connect the AC cable.
• The [POWER] Indicator A lights.
• The battery cannot be charged
when the DC cable is connected to
the AC adaptor.
2 Attach the battery to the AC
adaptor.
• When the [CHARGE] Indicator B
lights, charging starts.
• When the [CHARGE] Indicator B
turns off (in about 90 minutes),
charging is finished.
3 Detach the battery.
¬
Suggestions/Tips
¬
• After use, be sure to disconnect the
AC cable.
• The battery becomes warm after use/
charge or during charge. The camera
also becomes warm during use.
However, it is not a malfunction.
• The battery and AC adaptor are
designed only for this camera. Do
not use them with any other
equipment.
• Do not disassemble or alter the AC
adaptor.
FZ10-PP.book 12 ページ ２００３年１１月１８日 火曜日 午後１時７分
To Next Page
Loading...
