Others
117
Others
Using the MC Protector/ND Filter
The MC protector (DMW-LMC72; optional) is a transparent filter which affects
neither the colors nor the amount of light, so it can always be used to protect the
camera’s lens.
The ND filter (DMW-LND72; optional) reduces the amount of light to approximately
1/8th (equal to adjusting the aperture value 3 increments) without affecting the color
balance.
1 Remove the lens cap and the lens
ring.
2 Attach the lens hood.
3 Attach the MC protector 1 or the
ND filter 2.
• Cap 3 (supplied with MC
protector)
¬
Suggestions/Tips
¬
• The lens cap supplied with the camera
cannot be attached to the MC
protector or the ND filter.
• You cannot attach the MC protector
and the ND filter at the same time.
• When taking pictures with the flash
using the MC protector/ND filter,
vignetting effect may occur.
• When the MC protector/ND filter fell,
they may be destroyed. Be careful not
to drop them when attaching.
• The cap supplied with MC protector
can also be used for the ND filter.
• MCu“Multi-coated”
NDu“Neutral Density”
FZ10-PP.book 117 ページ ２００３年１１月１８日 火曜日 午後１時７分
To Next Page
Loading...
