Others
129
11: The picture does not appear on
the television.
11-1: Is the camera connected to the TV
correctly?
Check it.
11-2: Set the TV to video input mode.
12: When connecting to a PC,
pictures cannot be transferred.
12-1: Is the camera connected to the PC
correctly?
Check it.
12-2: Is the camera recognized by the
PC correctly?
12-3: Is the USB mode set correctly?
13: The clock setting is reset.
13-1: If you do not use the camera for a
long time, the clock setting may be
reset. When the message
[PLEASE SET THE CLOCK]
appears, set the clock again.
13-2: When you take a picture before
setting the clock, [0:00 0. 0. 0] is
recorded.
14: The camera will make sounds
caused by internal mechanical
movement when it is shaken.
14: The sound arises when the lens
moves. This is not a malfunction.
15: Some pixels are inactive or
always lit on the LCD monitor.
15: This is not a malfunction. These
pixels do not affect the recorded
pictures.
16: The pictures cannot be printed
with printers supporting USB
Direct-Print or PictBridge.
16: Is the USB mode set correctly?
FZ10-PP.book 129 ページ ２００３年１１月１８日 火曜日 午後１時７分
To Next Page
Loading...
