SQT1120 (ENG)
13
Preparations
Attaching the Lens Cap
Cover the lens with the lens cap to protect it when you are not taking pictures.
• Do not hang or swing around the camera with the lens cap string.
• Make sure to detach the lens cap when turning this unit on.
• Be careful that the lens cap string does not become entangled with the shoulder strap.
Shoulder strap eyelet
1
2
3
Pinch here to attach or
detach the cap.
4
1
Pass the string through the hole on the camera
2
Pass the string through the lens cap, and then pass the lens cap through the
loop formed by the string
3
Fasten the string
4
Attach the lens cap
Attaching the Shoulder Strap
We recommend attaching the shoulder strap when using the camera to prevent it from
dropping.
1
2
3
Pull the shoulder strap
2 cm or more.
4
Make sure the
strap does not
come off
• Perform steps
1
to
4
and then attach the other side of the shoulder strap.
• Use the shoulder strap around your shoulder.
– Do not wrap the strap around your neck. It may result in injury or accident.
• Do not leave the shoulder strap where an infant can reach it.
– It may result in an accident by mistakenly wrapping around the neck.
To Next Page
Loading...
