Recording
SQT1120 (ENG)
30
Recording mode:
You can switch the operation to be performed when you press the shutter button.
1
Press [ ] button ( )
2
Press to select the drive mode and
press [MENU/SET]
• The icons in the table are just examples.
[Single] When the shutter button is pressed, only one picture is recorded.
[Burst]
The pictures are recorded in succession while the shutter button
is pressed.
[4K PHOTO] (→31) When the shutter button is pressed, a 4K photo is recorded.
[Auto Bracket]
Each time the shutter button is pressed, the pictures are
recorded with different exposure settings based on the Exposure
Compensation range.
[Self Timer]
When the shutter button is pressed, recording takes place after
the set time has elapsed.
Cannot be set when using Intelligent Auto Mode.
• To cancel drive mode, select [ ] ([Single]) or [ ] .
Selecting a Drive Mode
Button
operation
Touch
operation
Description
Drag Moves the enlarged area.
—
Pinch in /
Pinch out
Enlarges/reduces the AF area in small steps.
— Enlarges/reduces the AF area in large steps.
—
Switches the enlarged display. (windowed/full screen)
[DISP.] [Reset] Resets the area to be enlarged back to the centre.
5
Press the shutter button halfway
• The assist screen will close. The recording screen will be displayed.
• You can also exit MF Assist by pressing [MENU/SET].
To Next Page
Loading...
