SQT1120 (ENG)
43
Wi-Fi
Connecting to a smartphone
For both iOS devices (iPhone/iPod touch/iPad) and Android devices
Connecting without entering the password
You can easily establish a Wi-Fi connection on this unit without entering a password on
your smartphone.
1
Select the menu on the camera (→23)
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Remote Shooting & View]
• The information required for directly connecting your smartphone
to this unit (SSID) is displayed.
• You can also display the information by pressing [Wi-Fi] button
on the camera.
2
Turn on the Wi-Fi function in the setting menu of the
smartphone
3
Select the SSID displayed on the screen of the camera
4
On the smartphone, start “Image App”
• When the connection confirmation screen appears on the camera, select
[Yes] and press [MENU/SET]. (Only when making a connection for the first
time.)
[Wi-Fi Password] is set to [OFF] at the time of purchase. In [OFF] state, a third
party can tap into the Wi-Fi transmission and steal transmitted data.
Set [Wi-Fi Password] to [ON].
For details, refer to “Operating Instructions for advanced features (PDF format)”.
Closing the connection
After use, close the connection with the smartphone.
(On the camera)
1
On the recording standby screen, terminate the connection from the menu of
the camera
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [Yes]
• You can also terminate the connection by pressing [Wi-Fi] button on the camera.
(On your smartphone)
2
Close “Image App”
• For details on how to close the application, refer to the operating instructions of your device.
To Next Page
Loading...
