- 107 -
Recording
[REC] Mode: ¿
Taking Pictures that match the Scene being
recorded (Scene Mode)
When you select a Scene Mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set [REC] Mode to [ ].
• For details on setting up [REC] Mode, refer to P30.
Touch the Scene Mode to select.
• Description of the selected scene mode is displayed
on the screen.
Touch [SET].
• The menu screen is switched to the recording screen in the selected Scene Mode.
Note
•
The Scene Mode flash setting is reset to the initial setting when the Scene Mode is changed
and then used.
• When you take a picture with a Scene Mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
• The following items cannot be set in Scene Mode because the camera automatically adjusts
them to the optimal setting.
– [SENSITIVITY]/[METERING MODE]/[I.RESOLUTION]/[I.DYNAMIC]/[ISO LIMIT SET]/
[DIGITAL ZOOM]/Items other than [COLOR] and [B/W] in [PICTURE ADJUST]
When taking pictures of people outdoors during the day, this mode allows you to improve
the appearance of the persons concerned and make their skin tones look healthier.
∫ Technique for Portrait Mode
To make this mode more effective:
1 Rotate the zoom ring as far as possible to Tele. (when a lens with a zoom function is
used)
2 Move close to the subject to make this mode more effective.
Note
•
The initial setting for the AF Mode is [š].
[PORTRAIT]
To Next Page
Loading...
Need help?
General
