- 153 -
Playback/Editing
You can stamp the recording date/time, name, location, travel date or title onto the
recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [S] will be
resized when stamping the date etc. on them.)
1 Select [TEXT STAMP] on the [PLAYBACK] Mode menu. (P56)
2 Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
4 Press 3/4 to select [SET], and then press [MENU/SET].
5 Press 3/4 to select text stamp items, and then press [MENU/SET].
[TEXT STAMP]
3 Select the picture, and then press
[MENU/SET] to set.
•
[‘] appears on screen if the picture is
stamped with text.
[MULTI] setting
Select the picture with 3/4/2/1 and
set (repeat) by pressing [MENU/SET],
then press
2 a few times to select [OK],
and execute by pressing [MENU/SET].
• The setting is cancelled when
[MENU/SET] is pressed again.
[SINGLE] [MULTI]
Press 2/1 to select
the picture.
Press 3/4/2/1 to
select the pictures.
To Next Page
Loading...
Need help?
General
