Recording
- 78 -
[REC] Mode:
Compensating the Exposure
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
Note
•
The set exposure value is memorised even if the camera is turned off. However, the exposure
value during the Intelligent Auto Mode is not memorised.
• The compensation range of the exposure will be limited depending on the brightness of the
subject.
• When the aperture and shutter speed values are displayed in the screen in the Programme AE
Mode, Programme Shift operation and Exposure Compensation operation is switched every
time the rear dial is pressed.
• In the Aperture-Priority AE Mode, Aperture Setting operation (P100) and Exposure
Compensation operation is switched every time the rear dial is pressed.
• In the Shutter-Priority AE Mode, Shutter Speed Setting operation (P100) and Exposure
Compensation operation is switched every time the rear dial is pressed.
• Exposure compensation can be performed by touching the slide bar in the Quick Menu (P58).
Underexposed
Properly
exposed
Overexposed
Compensate the exposure
towards positive.
Compensate the exposure
towards negative.
Press the rear dial to switch to Exposure
Compensation operation.
Rotate the rear dial to compensate the exposure.
A Exposure Compensation value
B [EXPO.METER]
• Select [0] to return to the original exposure.
• Rotate the rear dial to display the [EXPO.METER]. (P143) (However, it does not appear
in
ñ/¿ Mode.)
To Next Page
Loading...
Need help?
General
