Playback/Editing
- 154 -
6 Press 3/4 to select the settings, and then press [MENU/SET].
7 Press [ ] to return to the screen shown in step 4.
8 Press 3/4 to select [OK]. and then press [MENU/SET].
•
When selecting [ ] or [ ], press 3 to select [YES] for stamping [AGE], and then
press [MENU/SET] and proceed to step
9.
9 Press 3 to select [YES] and then press [MENU/SET].
•
Press [ ] to return to the menu screen. (The menu screen is automatically restored
when [MULTI] is selected.)
Note
•
When you print pictures stamped with text, the date will be printed over the stamped text if you
specify printing of the date at the photo shop or on the printer.
• You can set up to 100 pictures at one time in [MULTI].
• The picture quality may deteriorate when text stamping is carried out.
• Depending on the printer being used, some characters may be cut at printing. Check before
printing.
• Text and dates cannot be stamped on the pictures in the following cases.
– Motion pictures
– Pictures recorded without setting the clock and title
– Pictures that were previously stamped with [TEXT STAMP]
– Pictures taken with [ ], [ ] or [ ]
– Pictures recorded with other equipment
Item Setting item
[SHOOTING DATE]
[OFF]
[W/OTIME]:
Stamp the year, month and date.
[WITHTIME]:
Stamp the year, month, day, hour and minutes.
[NAME]
[OFF]
[]: Name registered in Face Recognition will be
stamped.
[]: Stamps names on pictures that already have
been registered name settings of [BABY1]/
[BABY2] or [PET] in Scene Mode.
[LOCATION]
[OFF]
[ON]:
Stamps the travel destination name set under
[LOCATION].
[TRAVEL DATE]
[OFF]
[ON]:
Stamps the travel date set under
[TRAVEL DATE].
[TITLE]
[OFF]
[ON]:
Title input in the [TITLE EDIT] will be stamped.
To Next Page
Loading...
Need help?
General
