- 127 -
Recording
For details on the [SETUP] menu settings, refer to P56.
You can display the local times at the travel destinations and record them on the pictures
you take.
•
Select [CLOCK SET] to set the current date and time in advance. (P60)
1 Select [WORLD TIME] from the [SETUP] menu, and then press [MENU/SET].
•
When first using the camera after purchasing it, the [PLEASE SET THE HOME AREA]
message appears. Press [MENU/SET], and set the home area on the screen in step
3.
2 Press 4 to select [HOME], and then press [MENU/SET].
Note
•
Return the setting to [HOME] when the vacation is finished by performing steps 1, 2 and 3.
• If [HOME] is already set, change only the travel destination, and use.
• If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
Recording Dates/Times at Overseas Travel Destinations (World Time)
3 Press 2/1 to select the home area, and then press
[MENU/SET].
A Current time
B Time difference from GMT (Greenwich Mean Time)
• If daylight saving time [ ] is used at the home area, press
3. Press 3 again to return to the original time.
• The daylight saving time setting for the home area does not
advance the current time. Advance the clock setting by one
hour.
4 Press 3 to select [DESTINATION] and then press
[MENU/SET] to set.
C Depending on the setting, the time at the travel destination
area or the home area is displayed.
5 Press 2/1 to select the area the travel destination is in
and then press [MENU/SET] to set.
D Current time of the destination area
E Time difference
• If daylight saving time [ ] is used at the travel
destination, press 3. (The time advances by one hour.)
Press 3 again to return to the original time.
To Next Page
Loading...
Need help?
General
