Panasonic LUMIX DMC-GF2C User Manual

- 183 -
Connecting to other equipment
Note
•
Do not use any other USB connection cables except the supplied one. Use of cables other than
the supplied USB connection cable may cause malfunction.
• Turn the camera off before connecting or disconnecting the AC adaptor (optional).
• Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.
• Motion pictures recorded cannot be printed out.
Selecting a single picture and printing it
1 Press 2/1 to select the picture and then press [MENU/
SET].
•
The message disappears in about 2 seconds.
2 Press 3 to select [PRINT START] and then press [MENU/
SET].
•
Refer to P185 for the items which can be set before starting to print
the pictures.
• Press [MENU/SET] to cancel printing halfway.
• Disconnect the USB connection cable after printing.
PictBridge
100
_
0001100
100
_
_
0001
0001
100
_
0001
PLEASE SELECT
THE PICTURE TO PRINT
SELECT PRINT
MULTI PRINT
OFF
1
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
SINGLE SELECT
SETSELECT
CANCEL

Panasonic LUMIX DMC-GF2C Specifications

General

Brand	Panasonic
Model	LUMIX DMC-GF2C
Category	Digital Camera
Language	English