Others
- 198 -
• Do not press the LCD monitor with excessive force. Uneven colours may appear on the LCD
monitor and it may malfunction.
• If the camera is cold when you turn it on, the picture on the LCD monitor/Optional Live
Viewfinder will be slightly darker than usual at first. However, the picture will return to normal
brightness when the internal temperature of the camera increases.
• Do not press the lens with excessive force.
• Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it
to malfunction. Also, be careful when placing the camera outside or near a window.
• When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the picture may
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
• Do not place the lens mount facing downwards. Do not allow the lens
mount contacts 1 to become dirty.
About the LCD monitor/Optional Live Viewfinder
Extremely high precision technology is employed to produce the LCD monitor/Optional
Live Viewfinder screen. However there may be some dark or bright spots (red, blue or
green) on the screen. This is not a malfunction. The LCD monitor/Optional Live
Viewfinder screen has more than 99.99% effective pixels with a mere 0.01% of the
pixels inactive or always lit. The spots will not be recorded on pictures on a card.
About the Lens
To Next Page
Loading...
Need help?
General
