- 89 -
Recording
∫ When operating the touch panel
When selecting [š], [Ø]
Position and size of the AF area can be changed.
1 Touch the subject.
•
AF area setting screen is displayed.
• When you touch outside the AF area frame A, it will
display the AF area setting screen, but the AF area will
not be set.
• The AF area returns to the centre when [Q.MENU/Fn]
is pressed.
2 Touch the slide bar to change the size
of AF area frame.
•
It can be changed to 4 different sizes.
3 Touch [SET].
•
AF area with the same function as [Ø] is displayed in
the touched position, when the [š] is selected. Setting
of the AF area is cleared when [ ] is touched.
When selecting [ ]
The 23 AF areas can be divided into 9 areas and the area to be focused can be set.
Touch the screen to display the AF area setting
screen, and select the AF area frame as shown in the
figure on the right.
•
After releasing you finger from the touch panel for a while,
AF area frame will disappear, and only [i] display (centre
point of selected AF area frame) will remain on the screen.
• Setting of the AF area frame is cancelled when [ ] is
touched.
Setting up position of the AF area/changing size of the AF area
To Next Page
Loading...
Need help?
General
