- 95 -
Recording
∫ Setting the White Balance manually
Set the White Balance value. Use to match the condition when taking photographs.
1 Select [ ], [ ] and then touch [WHITE SET].
•
The White Balance setting screen can also be displayed by pressing the cursor button
toward 3.
2 Aim the camera at a sheet of white paper etc. so
that the frame in the centre is filled by the white
object only and then touch [SET].
Note
•
White Balance may not be set when the subject is too bright or too dark. Set the White Balance
again after adjusting to appropriate brightness.
∫ Setting the colour temperature
You can set the colour temperature manually for taking natural pictures in different lighting
conditions. The colour of light is measured as a number in degrees Kelvin. As the colour
temperature increases, the picture becomes more bluish. As the colour temperature
decreases, the picture becomes more reddish.
1 Select [ ] and then touch [WB K SET].
•
The colour temperature setting screen can also be
displayed by pressing the cursor button toward 3.
2 Touch the colour temperature setting bar.
•
It is also possible to set the values by touching [3]/[4]
or pressing
3/4 of the cursor button.
• You can set a colour temperature from [2500K] to
[10000K].
3 Touch [SET].
To Next Page
Loading...
Need help?
General
