- 145 -
Recording
Applicable modes:
If you set the name and birthday of your baby or pet in advance, you can record their name
and age in months and years in the images.
You can display these at playback or stamp the recorded images using [Text Stamp]
(P164).
[ ] ([Baby1])/[ ] ([Baby2])/[ ] ([Pet])/[OFF]/[SET]
∫ Setting [Age] or [Name]
1 Select [Profile Setup] from the [Rec] menu. (P60)
2 Touch [SET].
3 Touch [Baby1], [Baby2] or [Pet].
4 Touch [Age] or [Name].
5 Touch [SET].
6 Touch [Exit].
•
The item selected in step 3 is automatically set.
∫ To cancel [Age] and [Name]
Select the [OFF] setting in step
2.
Note
•
It is not possible to record [Age] or [Name] for still pictures recorded during motion picture
recording (P50).
• If you select [Baby1], [Baby2] or [Pet] when neither [Age] nor [Name] has been set, the setting
screen is displayed automatically.
• The age and name can be printed out using the “PHOTOfunSTUDIO” bundled software on the
CD-ROM (supplied).
[Profile Setup]
Enter [Age]
For each item, touch [ ]/[ ], set the year/month/day of the
birthday, and touch [Set].
Enter [Name]
For details on how to enter characters, refer to “Entering Text”
on P138.
To Next Page
Loading...
