Playback/Editing
- 166 -
Recorded motion picture can be divided in two. It is recommended for when you want to
divide a part you need with a part you do not need.
Dividing a motion picture is permanent. Decide before you divide!
1 Select [Video Divide] on the [Playback] menu. (P60)
2 Drag the screen horizontally to select a motion picture to divide, and touch
[Set].
•
Touch [ ] during playback to fast forward (touch [ ] to fast rewind).
Note
•
The [Video Divide] feature only works on motion pictures recorded on this camera.
• Avoid trying to divide motion picture near the very beginning or end of the motion picture.
• With [MP4] motion pictures, the order of pictures will change if divided.
It is recommended to search these motion pictures by using Calendar Playback (P53) or [Video
Only] in the [Playback Mode].
• With [AVCHD] motion pictures, the order of pictures will not change.
• The [Video Divide] feature will be disabled during the following conditions:
– Motion pictures with a short recording time
[Video Divide]
3 Touch [ ] at the location to divide.
•
Motion picture is played back from the same location when [ ] is
touched again.
• Make fine adjustments to the division position by touching [ ]/
[ ] while the motion picture is paused.
• Display at the right of the screen corresponds to 3/4/2/1 on the
cursor button.
4 Touch [ ].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• Motion picture may be lost if the card or battery is removed while processing the dividing.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
