VQT3A48
104
Recording
Note
•
During Motion Picture Recording, settings for My Colour Mode are used.
• My Colour settings are memorised even if the camera is turned off.
• Auto Bracket cannot be used in My Colour Mode.
• ISO sensitivity will be fixed to [AUTO].
• [I.DYNAMIC], [COLOR SPACE] can be set only when the My Colour Mode is set to [CUSTOM].
• The following items cannot be set in My Colour Mode because the camera automatically
adjusts them to the optimal setting.
– [FILM MODE]/[FLASH]/[FLASH SYNCHRO]/[ISO LIMIT SET]
∫ Adjusting the custom settings to achieve desired effects
By selecting [CUSTOM], you can take pictures with colour, brightness and saturation
adjusted to desired levels.
1 Touch [2]/[1] to select [CUSTOM].
2 Touch the item.
3 Touch the slide bar.
4 Touch [SET].
∫ Return [CUSTOM] settings to default
1 Touch [ ] in above step 2.
2 Touch [YES].
•
Adjusted value for each item returns to standard (centre point).
Note
•
Adjustments made with [CUSTOM] are not in effect in other Recording Modes.
• Icons for the adjusted items are displayed in the screen when the [CUSTOM] are adjusted.
Displayed icon is the one for direction of adjustment.
• AF tracking may not function if you adjust [SATURATION] to make the colour lighter.
Item Adjustment contents
[COLOR]
This will adjust the colour of the image from red light to blue light.
(11 steps in n5)
[BRIGHTNESS] This will adjust the brightness of the image. (11 steps in n5)
[SATURATION]
This will adjust the colour intensity of the image from black and
white to vivid colour. (11 steps in n5)
[RESET]
Return all settings to default
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 104 ページ ２０１０年１０月１４日 木曜日 午後３時５０分
To Next Page
Loading...
