VQT3A36
28
Preparation
Preparing the Card (Optional)
• Check that this unit is turned off.
• We recommend using a Panasonic card.
Slide the card door to open it.
Push it securely all the way until you hear a
“click” while being careful about the direction
in which you insert it. To remove the card,
push the card until it clicks, then pull the card
out upright.
A:Do not touch the connection terminals of the card.
•
The card may be damaged if it is not fully inserted.
1: Close the card door.
2: Slide the card door to the end and then
close it firmly.
• If the card door cannot be completely closed, remove the
card, check its direction and then insert it again.
Note
•
Always turn the camera off before opening the card door.
• Before removing the card, turn the camera off, and wait until the status indicator has gone off
completely. (Otherwise, this unit may no longer operate normally and the card itself may be
damaged or the recorded pictures may be lost.)
Inserting/Removing the Card (Optional)
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 28 ページ ２０１０年１０月１９日 火曜日 午前１１時３分
To Next Page
Loading...
Need help?
General
