67
VQT3A36
Recording
Note
•
With the Extended Tele Conversion, for example, when it is set to [ ] (equal to 4 million
pixels), it will take the picture using the 4 million pixels in the center out of the 16 million pixels
of the imaging device, resulting to be more of a telephoto picture.
• When the Extended Tele Conversion is used, angle of view for still pictures will be different from
the angle of view for motion pictures because the zoom factor is different between them. Angle
of view for recording can be checked beforehand by matching the [ REC AREA] (P133)
setting to the mode you wish to record in.
• If you use the zoom function after focusing on the subject, focus on the subject again.
• The [STABILIZER] feature is disabled when using the Digital Zoom.
• If camera shake (jitter) is a problem during Digital Zooming, it is recommended that
[STABILIZER] be set to [MODE1].
• When using the Digital Zoom, we recommend using a tripod and the self-timer (P80) for taking
pictures.
• The AF Mode is fixed to [Ø] when using the Digital Zoom.
• The Extended Tele Conversion feature and Digital Zoom are disabled in the following modes:
– When [QUALITY] is set to [ ], [ ] or [ ]
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 67 ページ ２０１０年１０月１９日 火曜日 午前１１時３分
To Next Page
Loading...
Need help?
General
