153
VQT3A48
Playback/Editing
You can clear and replace all information relating to face recognition in selected images.
1 Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P55)
2 Press 3/4 to select [REPLACE] or [DELETE] and then press [MENU/SET].
3 Press 2/1 to select the picture and then press [MENU/SET].
•
You cannot select pictures for which Face Recognition information has not been
registered.
4 Press 2/1 to select the person and then press
[MENU/SET].
•
[DELETE] > step 6.
• You cannot select a person who has not been registered.
5 Press 3/4/2/1 to select the person to replace and then
press [MENU/SET].
6 Press 3 to select [YES] and then press [MENU/SET].
•
Press [‚] to return to the menu screen.
Note
•
Cleared information regarding the [FACE RECOG.] cannot be restored.
• When all Face Recognition information in a picture has been cancelled, the picture will not be
categorised using Face Recognition in [CATEGORY PLAY].
[FACE REC EDIT]
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 153 ページ ２０１０年１０月１４日 木曜日 午後３時５０分
To Next Page
Loading...
