91
VQT3A36
Recording
∫ About [ ] (Intelligent ISO sensitivity control)
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
• The actual shutter speed is calculated at the moment the picture is taken. It is continuously
changing to match the movement of the subject until the shutter button is pressed fully. Confirm
the actual shutter speed on the information display for the picture being played back.
Note
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
• Refer to P71 for the flash range.
• Even when [ ] is selected, jitter reduction is limited, and related to the scene characteristics.
• Detection of image movement of small objects or objects located at the perimeter of the picture
can be difficult.
• The setting is fixed to [ ] in the following cases.
– In [SPORTS], [BABY1]/[BABY2] and [PET] in Scene Mode
– In [INDOOR PORTRAIT] in Advanced Scene Mode
• Program Shift is deactivated when the ISO Sensitivity is set to [ ].
• [ ] is disabled when Shutter-Priority AE Mode and Manual Exposure Mode is selected.
[AUTO] is disabled in Manual Exposure Mode.
• To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE
REDUCTION] in [FILM MODE] towards [_] or setting the items except [NOISE REDUCTION]
towards [`] to take pictures. (P117)
• When [DIRECT FOCUS AREA] (P83) is set to [ON], the operations on the cursor buttons
translate to movements of the AF area. Set using the Quick Menu (P56).
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 91 ページ ２０１０年１０月１９日 火曜日 午前１１時３分
To Next Page
Loading...
Need help?
General
