VQT3A48
90
Recording
∫ Finely adjusting the White Balance
You can finely adjust the White Balance when you cannot acquire the desired hue by
setting the White Balance.
1 Select the White Balance and then touch [ADJUST.].
•
The White Balance adjust screen can also be displayed by pressing the cursor button
toward 4.
2 Touch within the frame to finely adjust.
•
You can finely adjust also by touching [G_]/[M`]/[A]/
[B], or pressing 3/4/2/1 of the cursor button.
3 Touch [SET].
Note
•
If you finely adjust the White Balance to A (amber), the White Balance icon on the screen will
change to orange. If you finely adjust the White Balance to B (blue), the White Balance icon on
the screen will change to blue.
• If you finely adjust the White Balance to G_ (green) or M` (magenta), [_] (green) or [`]
(magenta) appears beside the White Balance icon on the screen.
• Press [DISPLAY] to return to the centre point.
• Select the centre point if you are not finely adjusting the White Balance.
• The White Balance fine adjustment setting is reflected in the picture when using the flash.
• You can finely adjust the White Balance independently for each White Balance item.
• The White Balance fine adjustment setting is memorised even if the camera is turned off.
• The White Balance fine adjustment level returns to the standard setting (centre point) in the
following cases.
– When you reset the White Balance in [ ], [ ], [ ] or [ ]
– When you reset the colour temperature manually in [ ]
∫ White Balance Bracket
Bracket setting is performed based on the adjustment values for the White Balance fine
adjustment, and 3 pictures with different colours are automatically recorded when the
shutter button is pressed once.
1 Finely adjust the White Balance in step 2 of the “Finely
adjusting the White Balance” procedure, and touch [ ]/
[ ] to set the bracket.
•
Bracket settings can also be made by rotating the rear dial.
[ ] or rear dial right: Horizontal (A to B)
[ ] or rear dial left: Vertical (Gi to Mj)
2 Touch [SET].
Note
•
[ ] is displayed in White Balance icon in the screen when the White Balance Bracket is set.
• The White Balance Bracket setting is released when the power has been turned off (including
Sleep Mode).
• You will only hear the shutter sound once.
• [ ], [ ] or [ ] for [QUALITY] cannot be set.
• White Balance Bracket does not work when recording motion pictures.
2 : A (AMBER: ORANGE)
1 : B (BLUE: BLUISH)
3 :
G_ (GREEN: GREENISH)
4 : M` (MAGENTA: REDDISH)
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 90 ページ ２０１０年１０月１４日 木曜日 午後３時５０分
To Next Page
Loading...
