VQT3A48
138
Playback/Editing
Editing Burst Pictures
You can edit the pictures in the burst picture group as single pictures or in group units
(including all pictures in group).
∫ Editing single pictures within a burst picture group
•
The following editing menu can be used.
– [TITLE EDIT] (P144), [TEXT STAMP] (P145), [CROPPING] (P148), [ASPECT CONV.]
(P148), [FAVORITE] (P150), [PRINT SET] (P151), [PROTECT] (P152)
To select an image during continuous playback of burst pictures (Burst Play menu)
To select an image during normal playback
1 Select an image during continuous playback, and pause
by touching [ ].
2 Press [MENU/SET] to display the [PLAYBACK] Mode
menu.
3 Press 3/4 to select the item, and press 1.
4 Press 3/4 to select [SINGLE] or [MULTI] and then press
[MENU/SET].
•
You cannot select [SINGLE] or [MULTI] when [CROPPING] or
[ASPECT CONV.] is selected.
5 Select the picture, and perform editing.
For details on the various ways of editing, refer to “Using the
[PLAYBACK] Mode Menu” (P141).
1 Select the item on the [PLAYBACK] mode menu and then
press 1. (P55)
2 Press 3/4 to select [SINGLE IN BURST GROUP] or
[MULTI IN BURST GROUP] and then press [MENU/SET].
•
When [CROPPING] or [ASPECT CONV.] is selected,
[MULTI IN BURST GROUP] will not appear.
• Only the burst picture groups with burst icon [˜] are displayed.
3
Select the burst picture group and then press [MENU/SET].
• Pictures within the group are displayed.
4 Select the picture, and perform editing.
For details on the various ways of editing, refer to “Using the
[PLAYBACK] Mode Menu” (P141).
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 138 ページ ２０１０年１０月１４日 木曜日 午後３時５０分
To Next Page
Loading...
