119
VQT3A48
Recording
Note
•
Noise may become visible when you take pictures in dark places. To avoid picture noise, we
recommend setting [NOISE REDUCTION] towards [_] or setting the items except [NOISE
REDUCTION] towards [`] to take pictures.
• If you adjust a Film Mode, [_] is displayed beside the Film Mode icon on the screen.
• You cannot adjust [SATURATION] in the black and white settings in Film Mode.
• Film Mode cannot be adjusted in the Intelligent Auto Mode, Advanced Scene Mode and Scene
Mode.
∫ Multi Film Bracket
It will take pictures changing the type of film in accordance with the setting every time the
shutter button is pressed. (Up to 3 pictures)
1 Touch [2]/[1] to select [MULTI FILM].
2 Select [MULTI FILM 1], [MULTI FILM 2], or
[MULTI FILM 3], and then touch [2]/[1] to select
the film to be set for each.
•
[OFF] can be selected only for [MULTI FILM 3].
3 Touch [SET].
•
Multi film indication ([ ]) displayed on the screen will
flash until all pictures of preset amount are taken.
Note
•
Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.
Item Effect
[CONTRAST]
[r]
Increases the difference between the brightness and the
darkness in the picture.
[s]
Decreases the difference between the brightness and the
darkness in the picture.
[SHARPNESS]
[r] The picture is sharply defined.
[s] The picture is softly focused.
[SATURATION]
[r] The colours in the picture become vivid.
[s] The colours in the picture become natural.
[NOISE
REDUCTION]
[r]
The noise reduction effect is enhanced. Picture resolution may
deteriorate slightly.
[s]
The noise reduction effect is reduced. You can obtain pictures
with higher resolution.
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 119 ページ ２０１０年１０月１４日 木曜日 午後３時５０分
To Next Page
Loading...
