73
VQT3A36
Recording
Applicable modes:
Adjust the flash output if the recorded pictures are too bright or too dark.
1 Select [FLASH ADJUST.] in the [REC] Mode menu. (P55)
2 Press 2/1 to set the flash output and then press
[MENU/SET].
•
You can adjust from [j2 EV] to [i2 EV] in steps of [1/3 EV].
• Select [0 EV] to return to the original flash output.
Note
•
[i] or [j] is displayed on the flash icon in the screen when the flash
level is adjusted.
[REC] Mode:
Optical Image Stabilizer
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
The lens supplied in DMC-GH2H/DMC-GH2K has a stabilizer function.
•
There is an [O.I.S.] switch on the 14–140 mm/F4.0–5.8 lens supplied in DMC-GH2H.
• There is no [O.I.S.] switch on the 14–42 mm/F3.5–5.6 lens supplied in DMC-GH2K. Set the
[STABILIZER] settings in the [REC] Mode menu.
Adjust the flash output
When using a lens with an [O.I.S.] switch, it is
possible to set to enable the Optical Image Stabilizer
by switching the [O.I.S.] switch on the lens to [ON].
(It is set to [MODE1] at the time of purchase.)
Example when a lens with the
[O.I.S.] switch is mounted.
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 73 ページ ２０１０年１０月１９日 火曜日 午前１１時３分
To Next Page
Loading...
Need help?
General
