39
Recording
(ENG) VQT5H68
4 Press [MENU/SET] to set.
•
AF area with the same function as [
Ø
] is displayed in the touched position, when the [
š
] is selected.
Setting of the AF area is cleared when [MENU/SET] is pressed or [ ] is touched.
The 49 AF areas are divided into groups, each consisting of 9
areas (on the edge of the screen, 6 or 4 areas).
1 Press [].
2 Select [ ] and press 4.
•
AF area setting screen is displayed.
3 Press 3/4/2/1 to select an AF area group.
•
You can also select a group by touching the screen.
4 Press [MENU/SET] to set.
•
Only [i] display (center point of selected group) will remain on
the screen.
• Setting of the AF area frame is cleared when [MENU/SET] is
pressed or [ ] is touched.
By setting [Touch Pad AF] in [Touch Settings] (P104) in the
[Custom] menu, you can move the AF area displayed on the
viewfinder by touching the monitor.
•
If you touch the monitor when the Auto Focus Mode is set to
[Custom Multi] such as [ ], the AF area setting screen will be
displayed.
• Press the shutter button halfway to determine the focus position.
If you press [DISP.] before determining the focus position, the AF area frame returns to the
center position.
• To cancel the AF area frame when the Auto Focus Mode (P36) is set to [š] ([Face/Eye
Detection]), [ ] ([Tracking]) or [ ] ([49-Area]), press [MENU/SET].
When selecting [ ]
Setting the AF area position with the Touch Pad
Applicable modes:
> [Custom] > [Touch Settings] > [Touch Pad AF]
[EXACT]
Moves the AF area of the Viewfinder
by touching a desired position on the
Touch Pad.
[OFFSET]
Moves the AF area of the viewfinder
according to the distance you drag the
touch pad (P26).
[OFF] —
MENU
DMC-GH4_PPC-VQT5H68_eng.book 39 ページ ２０１４年３月１２日 水曜日 午後１０時３５分
To Next Page
Loading...
