23
Preparation
(ENG) VQT5H68
Rotating:
Selection of items or setting of values is performed during the various settings.
•
This Owner’s Manual describe operations of the rear dial/front dial as follows:
Allows you to set the aperture, shutter speed, and other settings when in / / / modes.
• In [Dial Set.] in the [Custom] menu, you can change the operation methods of the front dial and
rear dial. (P104)
Rotating the control dial:
Selection of items or setting of values etc., is performed.
•
The operation of rotating the control dial is illustrated as below in
This Owner’s Manual.
Example: When rotating the control dial to the left or right:
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
• This Owner’s Manual express the up, down, left, and right of the
cursor button as 3/4/2/1.
Rear Dial/Front Dial
e.g.: When rotating the rear dial to the left
or right
e.g.: When rotating the front dial to the left
or right
Mode dial Rear Dial Front dial
(P51) Program Shift Program Shift
(P52) Aperture value Aperture value
(P52) Shutter speed Shutter speed
(P52) Shutter speed Aperture value
Control Dial
Cursor buttons/[MENU/SET] button
DMC-GH4_PPC-VQT5H68_eng.book 23 ページ ２０１４年３月１２日 水曜日 午後１０時３５分
To Next Page
Loading...
Need help?
General
