42
Recording
VQT5H68 (ENG)
Taking Pictures using Auto Bracket
1
Set the drive mode dial to [ ].
2
Focus on the subject and take a picture.
• If you press and hold the shutter button, the number of
pictures that you set is taken.
• The Auto Bracket indication blinks until the number of
pictures that you set is taken.
∫
Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto Bracket
1 Select the menu. (P28)
2 Press 3/4 to select [Single/Burst Settings], [Step] or [Sequence] and then
press [MENU/SET].
3 Press 3/4 to select the setting and then press [MENU/SET].
•
Exit the menu after it is set.
Taking Pictures with the Self-timer
1
Set the drive mode dial to [ ].
2
Press the shutter button halfway to focus and
then press it fully to take the picture.
• Focus and exposure will be set when the shutter button
is pressed halfway.
• After the self-timer indicator flashes, recording starts.
∫ Changing the time setting for the self-timer
1 Select the menu. (P28)
2 Press 3/4 to select the mode and then press [MENU/SET].
•
Exit the menu after it is set.
Applicable modes:
> [Rec] > [Auto Bracket]
Applicable modes:
> [Rec] > [Self Timer]
Picture is taken 10 seconds after shutter is pressed.
After 10 seconds the camera takes 3 pictures at about 2 seconds intervals.
Picture is taken 2 seconds after shutter is pressed.
• When using a tripod, etc., this setting is a convenient way to avoid the jitter
caused by pressing the shutter button.
AFS
FHD
MOV
24
p
L
4:3
MENU
MENU
DMC-GH4_PPC-VQT5H68_eng.book 42 ページ ２０１４年３月１２日 水曜日 午後１０時３５分
To Next Page
Loading...
Need help?
General
