29
Preparation
(ENG) VQT5H68
Configuring basic settings of this unit (Setup Menu)
The [Setup] menu contains some important settings relating to the camera’s clock and power.
Check the settings of this menu before proceeding to use the camera. (P104)
Format the card before recording a picture with this unit.
Since data cannot be recovered after formatting, make sure to back up necessary
data in advance.
Select the menu. (P28)
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
The recording or setup/custom settings are reset to the default.
Select the menu. (P28)
•
Confirmation screens are displayed in the sequence of the [Rec] settings and the [Setup]/
[Custom] settings. It is executed when [Yes] is selected.
• The folder number and the clock setting are not changed.
The unit can be set up to prevent unnecessary battery consumption.
Select the menu. (P28)
•
Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].
• To turn the monitor/viewfinder on again, press any button or touch the monitor.
Formatting the card (initialization)
> [Setup] > [Format]
Restoring the default settings ([Reset])
> [Setup] > [Reset]
Conserving the battery life ([Economy])
> [Setup] > [Economy]
[Sleep Mode]
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF]
[Auto LVF/Monitor
Off]
The monitor/viewfinder is automatically turned off if the camera
has not been used for the time selected on the setting.
[5MIN.]/[2MIN.]/[1MIN.]
MENU
MENU
MENU
DMC-GH4_PPC-VQT5H68_eng.book 29 ページ ２０１４年３月１２日 水曜日 午後１０時３５分
To Next Page
Loading...
Need help?
General
