37
Recording
(ENG) VQT5B20
Registering your preferred settings (Custom Mode)
Recording Mode:
You can register the current camera settings as custom settings. If you then record in
Custom Mode, you can use the registered settings.
•
Initial setting of the Programme AE Mode is registered as the custom settings initially.
To allow recording using the same settings, up to 5 sets of current camera settings can be
registered using [Cust.Set Mem.]. (
, , , , )
1
Select the menu.
2
Press 3/4 to select the custom set to register and then press
[MENU/SET].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
You can easily call up the settings you have registered using [Cust.Set Mem.].
Set the mode dial to [ ] or [ ].
• The custom set registered for [ ] or [ ] is called up.
1
Set the mode dial to [ ].
• The custom set registered for [ ], [ ] or [ ] is called up. The most recently
used custom set is called up.
• To change a custom set
> To s te ps
2 and 3.
2
Press [MENU/SET] to display the menu.
3
Press 2/1 to select the custom setting you want to use, and then
press [MENU/SET].
Registering Personal Menu Settings (Registering custom settings)
Preparations: Set in advance the Recording Mode you wish to save and select the
desired menu settings on the camera.
[MENU] > [Custom]>[Cust.Set Mem.]
Recording using registered custom set
DMC-GX7K&GX7GN-VQT5B20_eng.book 37 ページ 2013年7月22日 月曜日 午後2時50分