54
Recording
VQT5B20 (ENG)
Applicable modes:
1
Select the menu.
2
Press 3/4 to select the item and then press [MENU/SET].
• Exit the menu after it is set.
• When using an optional interchangeable lens with an O.I.S. switch, it is possible to set to
enable the Optical Image Stabiliser by switching the O.I.S. switch on the lens to [ON]. (At the
time of purchase, it is initially set to [ ].)
Using the Optical Image Stabiliser function of a lens
A lens based on the Micro Four Thirds System standard/Four Thirds System
standard equipped with the Optical Image Stabiliser function is required.
(P53)
[MENU] > [Rec]>[Stabilizer]>[Operation Mode]
Item Description of settings
[]
([Normal])
Vertical and horizontal shake are compensated for.
[]
([Panning])
Camera shake is corrected for up/down movements. This mode is ideal
for panning (a method of taking pictures which involves turning the
camera to track the movements of a subject which continues to move
in a fixed direction).
[OFF]
[Stabilizer] does not work.
(This can be selected only when using a lens without the [O.I.S.]
switch.)
DMC-GX7K&GX7GN-VQT5B20_eng.book 54 ページ ２０１３年７月２２日 月曜日 午後２時５０分
To Next Page
Loading...
