Panasonic Lumix DMC-GX7K - Select a Drive Mode

48
Recording
VQT5B20 (ENG)
Select a Drive Mode
Applicable modes:
Selecting the drive mode allows you to switch the operation, such as burst recording or the
self-timer, for when you press the shutter button.
1
Press 4 ().
2
Press 2 / 1 to select the drive mode, and then
press [MENU/SET].
• To cancel the drive mode, select [ ]. The setting will switch to [Single].
• Settings for each drive mode can be changed by pressing 3.
Drive mode Description of settings
1
[Single] (P22)
When the shutter button is pressed, only one picture is
recorded.
2 [Burst] (P49)
Recordings are made in succession while the shutter
button is pressed.
3
[Auto Bracket] (P51)
Each time the shutter button is pressed, recordings
are made with different exposure settings according to
the Exposure Compensation range.
4 [Self Timer] (P52)
When the shutter button is pressed, recording takes
place after the set time has elapsed.
31/3
H
0RUHVHWWLQJV
1 2 3 4
DMC-GX7K&GX7GN-VQT5B20_eng.book 48 ページ ２０１３年７月２２日 月曜日 午後２時５０分