66
Wi-Fi/NFC
VQT5B20 (ENG)
A Wi-Fi connection using NFC function is possible by touching the smartphone/tablet to
this unit, and you can easily transfer images displayed on the screen.
An image can be sent on site immediately after taking it, so you can easily send it to the
smartphone/tablet
¢
of your family or friend.
¢ Installing the “Image App” is required for use.
1 Play back the picture you want to transfer to the smartphone/tablet in the
camera.
2 Launch “Image App” on the smartphone/tablet at the transfer destination.
3 While [ ] is displayed on the connection
screen of the “Image App”, touch the
smartphone/tablet to [ ] of this unit.
•
It may take time to complete the connection.
• If a connection attempt by touching fails, restart
the “Image App”, and then display the screen in
step
2 again.
• They cannot be transferred as a batch.
• Depending on the environment you are using, it may take a few minutes to complete the image
transfer.
Transferring images stored in the camera easily
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON].
• Set [Touch Sharing] to [ON].
(On your smartphone/tablet)
•
Check that your smartphone/tablet is a
compatible model.
• Turn on the Wi-Fi function.
• Install the “Image App” in advance. (P62)
DMC-GX7K&GX7GN-VQT5B20_eng.book 66 ページ ２０１３年７月２２日 月曜日 午後２時５０分
To Next Page
Loading...
Need help?
General
