Preparation
16
Inserting the Card
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is stored.
[Inserting the card]
1 Slide the door in the direction of the
arrow to open the Memory Card door.
2 Insert the card all the way in until it
clicks.
• Check the direction of the card.
• Do not touch the connection terminals on
the back side of the card.
3
Slide the
door in
the direction of the
arrow to
close the Memory Card door.
[Removing the card]
4 Slide in the direction of the arrow to
open the Memory Card door.
5 Press the card to release.
6 Pull the card out.
7
Slide the
door in
the direction of the
arrow to
close the Memory Card door.
• If you are using a MultiMediaCard type
memory card and the Memory Card door
cannot close, the card may be installed
backwards. Remove the card and reverse it,
then try to close the door again.
• If the Memory Card door cannot be
completely closed, take the card out and
insert it again.
• We recommend that you use a Panasonic
branded SD Memory Card. (Use only the
genuine card)
• If the card is not fully inserted, the card may
be damaged.
3,7
5,6
1,4
2
KC52-PP.book 16 ページ ２００３年３月１３日 木曜日 午後２時２９分
To Next Page
Loading...
Need help?
General
