Technical use
84
After Use
After using the camera and following the
steps below, it is recommended to place it in
the optional soft case for protection.
1 Turn the power switch to [OFF]. (P18)
2 Eject the card
. (P16)
3 Remove the batteries
.
• If you will not be using the camera for a long time, remove the batteries. (When
you insert the batteries again, set the date/time)
2
3
OFF ON
1
KC52-PP.book 84 ページ ２００３年３月１３日 木曜日 午後２時２９分
To Next Page
Loading...
