Technical use
80
USB DIRECT-PRINT
By connecting the camera to a printer corresponding to USB DIRECT-PRINT via the
supplied USB connection cable, it is possible to print directly.
(Please ask the manufacturer of the printer about the corresponding models)
(Read the printer operating instructions too)
1 Insert the Memory Card into the camera, and turn the power switch to
[ON].
2 Turn on the printer.
3 Connect the camera to the printer via the supplied USB cable 1.
• When connecting to a printer, use the batteries which the remaining power is
enough or AC adaptor 2 (optional, DMW-AC1).
• Disconnect the USB connection cable and DC cable after printing.
A/V OUT
DC IN
USB
1
2
1
2
3
KC52-PP.book 80 ページ ２００３年３月１３日 木曜日 午後２時２９分
To Next Page
Loading...
