Recording images (advanced)
44
Compensating the Exposure
In some situations the illumination of the
background and your subject may differ. Auto
exposure systems may not always calculate
the exposure correctly. This is a normal
situation. This feature allows you to manually
compensate the exposure.
[Preparation]
• Set the mode dial except for
[ ]/[ ]/[ ]. (P22)
1 Press the [ ] button.
2 Press 2/1 to compensate the
exposure.
• You can compensate from j2 EV to i2
EV with 1/3 EV step.
(EV is an abbreviation of Exposure Value,
and it is the amount of light given to the
CCD by the aperture value and the
shutter speed)
• The compensation state may be different
from the recorded picture. Confirm the
playback picture.
3 Press the 4/[REVIEW/SET] button.
• The compensation window will close.
• The compensation state is not reflected
by the brightness of the LCD monitor.
• The exposure compensation indication 1
will appear.
4 Take a picture.
• Depending on brightness of the subject, the range for which it is possible to
compensate the exposure will be limited.
4
1,2,3
3
2048
EXPOSURE
EXITSELECT
+
1
/
3
EV
2
KC52-PP.book 44 ページ ２００３年３月１３日 木曜日 午後２時２９分
To Next Page
Loading...
