- 126 -
Wi-Fi
∫ About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
Pressing and holding [Wi-Fi] before connecting to Wi-Fi
(When connecting to a smartphone/tablet)
•
The information required for connecting the smartphone/tablet to
this unit (QR code, SSID and password) is displayed. (P129)
Pressing [Wi-Fi] before connecting to Wi-Fi
•
Following items can be selected.
Pressing[Wi-Fi]when using a Wi-Fi connection
•
Following items can be selected.
When the camera is connected using [Remote Shooting & View], a guide explaining how to
terminate the Wi-Fi connection is displayed. (P132)
• Do not remove the memory card or battery or move to an area without any reception while
sending images.
• The monitor display may become distorted for an instant while connected to the service, however
this will not affect the image being sent.
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi
connection
[New Connection] (P129)
[History Connection] (P149)
[Favorite Connection] (P149)
[Wi-Fi Setup] (P153)
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination]
Terminates the Wi-Fi connection, and allows you to select a
different Wi-Fi connection.
[Change Settings for Sending
Images]
Refer to P152 for details.
[Register the Current
Destination to Favorite]
Registering the current connection destination or the
connection method, you can easily connect with the same
connection method next time.
[Network Address] Displays the MAC address and IP address of this unit.
Cancel
Please scan the QR code using "Image App",
or enter the password into Wi-Fi settings
Please set on your smartphone
SSID:
Password:
To Next Page
Loading...
