- 138 -
Wi-Fi
1 Press [Wi-Fi].
2 Press 3/4/2/1 to select [New Connection], and then press [MENU/SET].
3 Press 3/4 to select [Send Images Stored in the
Camera], and then press [MENU/SET].
4 Press 3/4 to select [Smartphone], and then press
[MENU/SET].
5 Press [MENU/SET].
6 Press [MENU/SET].
•
For details on the connection methods, refer to P130, 131.
7 Press 3/4 to select a device you want to connect, and then press [MENU/SET].
8 Check the send setting, and then press [MENU/SET].
•
To change the send setting, press [DISP.]. (P152)
9 Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
•
To change the setting or disconnect, press [Wi-Fi]. (P126)
Sending selected images ([Send Images Stored in the Camera])
[SINGLE] setting
1 Press 2/1 to select the picture.
2 Press [MENU/SET].
[MULTI] setting
1 Press 3/4/2/1 to select the picture, and then press
[DISP.]. (repeat this step)
•
The setting is cancelled when [DISP.] is pressed again.
2 Press [MENU/SET].
•
The number of pictures that can be sent by [MULTI] is
limited.
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Cancel
Select
Set
Send Images Stored in the Camera
Send Images While Recording
Remote Shooting & View
Select a function
4 6
2
31
5
To Next Page
Loading...
