Basics
Taking pictures with your own settings
[Program AE] Mode
SQW0206
- 45 -
■
Recording mode:
Take pictures with automatic shutter speed and aperture value settings.
Using the [Rec] menu to change settings and set up your own recording environment.
Set mode dial to [ ] ([Program AE] Mode)
Take a picture
Press halfway
(press lightly to focus)
Press fully
(press the button all the
way to record)
●
If a warning is displayed about jitter, use
[Stabilizer], a tripod, or [Self Timer].
●
If aperture and shutter speed are shown in red,
you do not have appropriate exposure. You should
either use the flash, change [Sensitivity] settings or
set [Min. Shtr Speed] to a slower speed.
Jitter alert
display
Aperture value Shutter speed
To Next Page
Loading...
