Basics
Entering Text
SQW0206- 76 -
Use the cursor button to enter names with the Face Recognition function and in Scene
Modes [Baby] and [Pet], or to register locations in [Travel Date] etc.
Use to select characters
Press [MENU/SET] several times until the desired character is
displayed
Cursor position
Text is inserted at the cursor position.
●
To change the character type
• Press [DISP.] button
• Use to select [ ] and press
[MENU/SET].
●
To continue entering characters
• Use to select [ ] and press [MENU/SET]
• Move the zoom lever toward T side
• Turn the control dial to the right
●
Editing text
Use to select [ ] [ ] and press [MENU/SET]. Then, move the cursor
to the text to edit
• You can also use the zoom lever or control dial to reposition the cursor.
Use to select [Delete] and press [MENU/SET]
Use to select the correct text, and then press [MENU/SET]
When you are finished entering text, use to select
[Set] and press [MENU/SET]
●
A maximum of 30 characters can be entered (maximum of 9 characters when setting
names in [Face Recog.]).
*
A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ] (maximum of
6 characters when setting names in [Face Recog.]).
To Next Page
Loading...
