Basics
Viewing motion pictures
SQW0206
- 58 -
Capturing still pictures from motion pictures
Save a scene from a motion picture as a still picture.
Display the picture that you want to capture as a still picture
by pausing a motion picture during playback
Press [MENU/SET]
• A confirmation screen is displayed.
Select [Yes] and press [MENU/SET] to save the
picture.
• Still pictures are saved with [Aspect Ratio] setting of [16:9] and [Picture Size] at
2M
*
.
*
In the following cases, saved pictures become [4:3], 0.3M.
• MP4 motion pictures with [Rec Quality] of [VGA/25p]
• High-speed motion pictures with [Recording Speed] of [200fps]
●
The picture quality becomes slightly lower depending on the [Rec Quality] setting of
the original motion picture.
●
It may not be possible to capture still pictures from motion pictures that were recorded
with a different camera.
To Next Page
Loading...
